Probes and stallions There are 20 products.
-
Probe Holder Bubble Magus
Support of 4 probes for monitor or controller on decanter or tank. It can be fixed up to 15 mm in glass thickness
-
Electrode pH MA 911 Milwaukee
Milwaukee MA911B/2 Lab Grade Double Junction pH Electrode with Extended Cable
-
Probe cleaning solution Milwaukee
Each time a measurement is taken, a thin film is deposited on the electrode. it must be cleaned regularly to ensure that the measurements are always correct. This M10016 solution sachet is for single use.
-
-
-
-
PH10 standard solution Milwaukee
The Milwaukee M10010 calibration solution is sold in a single-use 20ml sachet.
-
pH7 standard solution Milwaukee
Milwaukee M10007 calibration solution is sold in a single-use 20ml sachet.
-
pH4 standard solution Milwaukee
The Milwaukee M10004 calibration solution is sold in a single-use 20ml sachet.
-
pH Electrode PL-0071 Profilux GHL
The pH electrodes are equipped with a gel electrolyte and a ceramic diaphragm, 3 m cable, BNC-plug.
-
-
Conductivity-Electrode platinum PL-0055 GHL
Longlife platinum electrode, suitable for fresh water and marine water, 3 m cable, BNC-plug.
-
-
-
KH Director Reagent PL-1542 GHL - 1000ml
Highly precise and stabilized reagent solution for KH Director.
-
KH Director Reagent PL-1541 GHL - 500ml
Highly precise and stabilized reagent solution for KH Director.
-
EC-Buffer Solution 12.88 20 ml Milwaukee
The Milwaukee M10030 calibration solution is sold in a single-use 20ml sachet.
-
TDS solution 6.44 ppt Milwaukee
The Milwaukee M10038 calibration solution is sold in a single-use 20ml sachet.
-
-
