The GHL Doser 2.1 Slave needs to be...
With Milwaukee's Smart controllers you can monitor and control pH and/or ORP levels directly in your aquarium. All our controllers work with a 12 VDC adapter and can be hanged above your aquarium.
Support of 4 probes for monitor or controller on decanter or tank. It can be fixed up to 15 mm in glass thickness
Milwaukee MA911B/2 Lab Grade Double Junction pH Electrode with Extended Cable
Ready-to-use redox monitor (ORP) with battery.
Each time a measurement is taken, a thin film is deposited on the electrode. it must be cleaned regularly to ensure that the measurements are always correct. This M10016 solution sachet is for single use.
The MW700 is a portable luxmeter with waterproof probe.
RO TDS 2 Monitor is used for the precise determination of the water quality of reverse osmosis units.
The refractometer is an optical instrument that uses the measurement of the refractive index to determine the salinity of natural and artificial seawater, seawater or brackish intermediates.
Calibration fluid Redox 220mV, 50 ml.
Mini iron colorimeter Range 0.00 to 5.00 ppm with a resolution of 0.01 ppm
Iodine mini colorimeter 0.0 to 12.50 ppm range with a resolution of 0.1 ppm
Mini phosphate colorimeter Range 0.00 to 2.50 ppm with a resolution of 0.01 ppm
Reagent for Milwaukee photometer - Iron
Reagent for photometer Iodine Milwaukee
Refill Pack Test for determining the ammonium and ammonia concentration
Test for measuring the calcium level
The Milwaukee M10010 calibration solution is sold in a single-use 20ml sachet.
The SeaTesT Control System (SCS) is used to make an accurate measurement (down to 0.01mg/l) on the following AQUARIUM SYSTEMS tests: pH, NH4, NO2, NO3, PO4
The pH electrodes are equipped with a gel electrolyte and a ceramic diaphragm, 3 m cable, BNC-plug.
3 m cable, BNC-plug.
Longlife platinum electrode, suitable for fresh water and marine water, 3 m cable, BNC-plug.
Temperature sensor with Mini-DIN-plug and 3 m cable.
Oxygen electrode PL-0368 GHL 3 m cable, BNC-plug.
The Milwaukee M10030 calibration solution is sold in a single-use 20ml sachet.